Name: ToolkitRC M4Q 4x50W AC/DC Charger
SKU: OY0000128856
Availability: InStock

Complimentary shipping on orders over $40

Featured piece

Sale!

Batteries & Chargers

ToolkitRC M4Q 4x50W AC/DC Charger

SKU OY0000128856 Category Batteries & Chargers

Thoughtful quality

Easy delivery

30-day returns

Description

The ToolKitRC M4Q is a 4in1 charger that has 4x 50W charging circuits inside. This allow you to balance charge 4 batteries at the same time. This charger also features an integrated AC power supply for use with a suitable mains lead. It also includes a XT60 input connector to enable in the field charging.

We have found that out of the box (or after a firmware update) you will likely need to calibrate the voltage on the charger before use, it takes 3 minutes but you will need a voltmeter. We have a quick guide showing how to do that here – Toolkit RC voltage calibration guide.

Specifications

Input voltage:[email protected], DC10-18V@MAX20A
Type of battery:LiPo LiHV LiFe Lion@1-4S NiMh @1-10S Pb @1-8S
Balance current:240mA @2-4S
Balance accuracy: < 0.005V
Charge power:
- 0.1-5A@50W*4 DC
- 0.1-5A@50W*2 AC
- 0.1-5A@25W*4 AC
Voltage range:0.2V-5.0V @1-4S
Internal resistance:1-100mR @1-4S
MicroUSB:[email protected]
Product size:150*112*36.5mm
Product wight:450g
Pack size:160*160*46mm
Pack wight:600g
LCD:IPS 3.5inch 480*320pixel

Power lead: The manufacturer-packed mains lead may vary. A UK three-pin lead is not guaranteed; some units may include a European two-pin lead. This model uses an IEC C7 figure-eight inlet. If you need a UK lead, a matching UK figure-eight mains lead is available separately.