Complimentary shipping on orders over $40
Featured piece

Tattu G-Tech 6000mAh 6S 150C Lipo Battery Pack with AS150 Plug

Original price was: $189.95.Current price is: $94.98.
SKU OY0000103475 Category
Thoughtful quality
Easy delivery
30-day returns

The battery is embedded with a G-Tech chip, enabling automatic identification, communication, and charging with the G-Tech Eco Smart Charger. It can also be charged regularly with a standard charger.

NOTE: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.

Features:

  • Stable automatic stacking technology enables single-cell capacities of 6000mAh.
  • Higher capacity than comparable size packs.
  • Up to 2 times of service life compare to other brand battery at the same rating.

Specifications:

  • Minimum Capacity: 6000mAh
  • Configuration: 6S / 22.2V / 6 Cells
  • Discharge Rate: 150C
  • Connector Type: AS150
  • Discharge Wire Length(mm): 120
  • Net Weight(20g): 945g
  • Dimensions: 161mm Length x 45mm Width x 61mm Height
  • Charge Plug: G-Tech-7P

Application:

  • It provides high quality and reliable power and is specially designed for Cinelifter X8.

Recommend Charger:
TA1000 charger / D1000 charger / Gens ace D300 charger.

Lipo Battery Guide

Lipo Battery Safety

  • Batteries should NEVER be left unattended while charging.
  • Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged both voltage and current settings.
  • Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
  • Do not charge batteries near flammable items or liquids.
  • Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
  • Never charge inside an automobile even when parked.
  • KEEP BATTERIES AWAY from children and pets at ALL times.
  • Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
  • Battery may explode if damaged or disposed of in fire
  • Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
  • Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
  • Immediately discharge damaged batteries at 1/2 C rate and dispose
  • Do not put the loose cells in a pocket, bag, or drawer where they could