Self powered micro IRT/C’s are the most reliable non-contact temperature sensors in the market place. There are no active electronics so these passive thermocouple sensors can not fail.
Patented technology, the principle of operation of these sensors are calibrated to match conventional thermocouples at a specific temperature. By adjusting the calibration setting (c) of the IRT/C to equal the Seebeck coefficient (a), the signal output (mVout) will be within 2% linear to match the conventional thermocouple at a temperature close to the calibration point. As a result, when the Exergen IRT/C is wired into a conventional t/c input device, the target temperature (Tt) displayed will be the same as the surface (Ts).
IRt/cs are pre-calibrated at the factory for typical target material emissive properties, but actual emissivities may differ. The accuracies specified assume that the precalibrated value is correct for your installation, or that the system has been calibrated at a single point for the application.
| Target Temperature Variation | Error(greater of) |
| 0F (0C) | 0% or 0.02F (0.01C) |
| 5F ( 3C) | 0.2% or 0.5F (0.3C) |
| 10F ( 6C) | 0.4% or 1.0F (0.6C) |
| 20F ( 12C) | 1% or 2F (1C) |
| 40F ( 24C) | 2% or 4F (2C) |
| 75F ( 42C) | 5% or 8F (5C) approx. |
| 180F ( 100C) | > 5% or 8F (5C) |
[to_order_table]
| To Order the models below scroll to the top of the page and choose the desired model from the “Models” drop down menu, then ADD TO CART |
| PART NUMBER | TEMPERATURE RANGE, OUTPUT |
| IR-EX-UIRT/C-K-440F/220C | 320-500F, K thermocouple output |
| IR-EX-UIRT/C-K-340F/170C | 280-370F, K thermocouple output |
| Reviews (0) |
Reviews
There are no reviews yet.