Previously called 60% Thin
S for small and more importantly… Screw in Stabilizers! These are intentionally thinner than your normal o-rings to allow the use of the screw in stabs on the backspace and spacebar.
Please only buy this o-ring if you are using screw in stabilizers for your 60% keyboard.
Thickness: ~3mm
Diameter: ~305mm
Previously called 65%
M for medium! These are standard sized to fit most 65% keyboards as well as some 60%.
There is also a chart for you to see if your board is on our checked list. If it is not on our chart, we do not recommend buying it, and you are buying at your own risk.
Thickness: ~3.5mm
Diameter: ~325mm
For 70/75% keyboards.
X for TKL! These are standard sized to fit mostTKL keyboards
There is also a chart for you to see if your board is on our checked list. If it is not on our chart, we do not recommend buying it, and you are buying at your own risk.
| Keyboard | Using at least 1 screw-in stabilizer on backspace or spacebar? | Using only snap-ins? |
| Snake60 R2 | Yes | Yes |
| Krush65 | Yes | Yes |
| Monokei Kei | No.Buy the Medium 35A or higher | No. Buy the Medium 35A or higher. |
| TGR x Singa Unikorn 60 | Yes | It may fit loose. Please buy Medium o-rings for a tighter fit similar to the stock one. |
| CK Bakeneko60 | Yes | It may fit loose. Please buy Medium o-rings for a tighter fit similar to the stock one. |
| CK Bakeneko65 | Yes, 50A or lower easiest to install. 55A+ will require patience | |
| Zekk Ogre | Yes, but you may have trouble using screw-ins at both backspace and space. | Yes |
Reviews
There are no reviews yet.