16oz wrap
Wipe the item thoroughly with a lint-free cloth to remove dust, oils, or residue.
Your UV-DTF should have two layers:
Top protective film
Printed adhesive design
Carefully peel away backing sheet, leaving the printed design stuck to the clear adhesive film.
Be gentle to ensure the entire design remains on the sticky layer.
Line up your design on the surface exactly where you want it.
Press it down firmly and evenly once it sticks, you can’t reposition it!
Use a squeegee, scraper, or your fingers to rub over the transfer.
Apply firm pressure to bond the design to the surface especially at edges and corners.
Slowly and carefully peel away the clear top layer.
Your design should now be fully adhered to the item!
Best for smooth, hard surfaces only.
No heat or water needed.
Hand wash items if possible; avoid dishwashers for long-lasting results.
Store transfers flat, away from heat and moisture.
-50% 
-50% 
-50% 
-50% 
Reviews
There are no reviews yet.