Important Note: SKYMO products are not sold on Amazon. Any similar items found there are unauthorized counterfeits from overseas sellers. Weve had many people contact us or leave negative comments after experiencing issues with these counterfeit products, believing they had purchased an authentic SKYMO mount. To ensure you receive genuine SKYMO parts, please purchase only through skymo.com, our exclusive store.
Our best-selling radio mount is not vehicle-specific, so you can install it in any vehicle with a suitable cup holder or console sidewall.
It uses two bolts to clamp onto your cup holder or sidewall of your console.
This mount consists of three plastic pieces and a metal mounting plate (note that the mounting plate does not replace your radio’s bracket you will still need your radio’s bracket).
The main mount components are curved to fit a cup holder, but an adapter is included to create a flat surface if you are mounting to a flat surface.
Hardware to attach your radio bracket to the mount is included.
The Mounting Plate is 14 gauge steel, powder-coated black. The other components are printed parts made of ABS.
Clamping Range: 1.5″ – 3.75″
This means whatever you clamp to must be at least 1.5″ wide but no wider than 3.75″. The mount comes with bolts of varying lengths so you can swap in shorter or longer bolts depending on the width of what you are mounting to. If you use the longer bolts when mounting to a narrower area, you will find that they stick out the backside of the mount into your cup holder, so the goal is to use the bolt length that engages enough threads but doesn’t stick out the back of the mount.
Installation Tip:
Do not over-tighten the clamping bolts when you install this on the cup holder or console. In testing these, we’ve found that the mount can withstand more than enough force to keep it in place, especially if the grip tape is used. Just be careful to not crank on it so hard that it breaks.
Getting Started
Watch the video below for a quick walkthrough of what you need to know to get started with your new radio mount.
To use the radio mount:
Use the 1/4 hardware ((2) button head cap screws, (2) square nuts, (2) washers) to secure the Mounting Place to the plastic part that is labeled “Mounting Plate Piece” at your desired height (if you’ve already removed the packaging with the label, you can also identify the Mounting Plate Piece by the part number being
Reviews
There are no reviews yet.
Be the first to review “Adjustable Console Radio Mount – Clamping Mount Works With CB, Ham, GMRS Radios, Scanners and More” Cancel reply
-50% 
Reviews
There are no reviews yet.